Options -Indexes inefficace

Discussion dans 'Administration d'un site Web' créé par Toma, 13 Août 2010.

  1. Toma
    Toma WRInaute discret
    Inscrit:
    18 Janvier 2006
    Messages:
    217
    J'aime reçus:
    0
    Bonjour,

    J'ai un serveur tout neuf avec une debian lenny et un apache tout frais.
    Je viens de mettre "Options -Indexes" dans /etc/apache2/httpd.conf (c'est la seule ligne du fichier) et en désespoir de cause au début et à la fin de /etc/apache2/apache2.conf. Et pourtant le contenu de mes répertoires est listé dans mon navigateur. J'ai bien redémarré apache avec /etc/init.d/apache2 restart, j'ai même redémarré le serveur...
    Il n'y a pas de virtual host, j'avais juste changé ServerTokens et ServerSignature, toute la configuration est de base. Qu'est-ce qui ne va pas ? Il y a surement un truc que je n'ai pas compris...
     
  2. Toma
    Toma WRInaute discret
    Inscrit:
    18 Janvier 2006
    Messages:
    217
    J'aime reçus:
    0
    8O je dois vraiment être à la masse mais ça marche toujours pas... J'ai même mis "Options -Indexes" dans un fichier .htaccess à la racine du site.
    La seule solution que j'ai trouvée, c'est de désactiver le module autoindex, mais ça me convient pas trop. Je suis tellement désespéré que je vous donne l'url. (j'ai réactivé autoindex)

    Edit : plus besoin...

    (Il y a toujours le "Options -Indexes" dans /etc/apache2/httpd.conf). Et voilà aussi mon /etc/apache2/apache2.conf :

    Code:
    #
    # Based upon the NCSA server configuration files originally by Rob McCool.
    #
    # This is the main Apache server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See http://httpd.apache.org/docs/2.2/ for detailed information about
    # the directives.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned.  
    #
    # The configuration directives are grouped into three basic sections:
    #  1. Directives that control the operation of the Apache server process as a
    #     whole (the 'global environment').
    #  2. Directives that define the parameters of the 'main' or 'default' server,
    #     which responds to requests that aren't handled by a virtual host.
    #     These directives also provide default values for the settings
    #     of all virtual hosts.
    #  3. Settings for virtual hosts, which allow Web requests to be sent to
    #     different IP addresses or hostnames and have them handled by the
    #     same Apache server process.
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
    # with ServerRoot set to "" will be interpreted by the
    # server as "//var/log/apache2/foo.log".
    #
    
    ### Section 1: Global Environment
    #
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    #
    
    #
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # NOTE!  If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation (available
    # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
    # you will save yourself a lot of trouble.
    #
    # Do NOT add a slash at the end of the directory path.
    #
    ServerRoot "/etc/apache2"
    
    #
    # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
    #
    #<IfModule !mpm_winnt.c>
    #<IfModule !mpm_netware.c>
    LockFile /var/lock/apache2/accept.lock
    #</IfModule>
    #</IfModule>
    
    #
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    # This needs to be set in /etc/apache2/envvars
    #
    PidFile ${APACHE_PID_FILE}
    
    #
    # Timeout: The number of seconds before receives and sends time out.
    #
    Timeout 300
    
    #
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    #
    KeepAlive On
    
    #
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    #
    MaxKeepAliveRequests 100
    
    #
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    #
    KeepAliveTimeout 10
    
    ##
    ## Server-Pool Size Regulation (MPM specific)
    ## 
    
    # prefork MPM
    # StartServers: number of server processes to start
    # MinSpareServers: minimum number of server processes which are kept spare
    # MaxSpareServers: maximum number of server processes which are kept spare
    # MaxClients: maximum number of server processes allowed to start
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule mpm_prefork_module>
        StartServers          5
        MinSpareServers       5
        MaxSpareServers      10
        MaxClients          150
        MaxRequestsPerChild   0
    </IfModule>
    
    # worker MPM
    # StartServers: initial number of server processes to start
    # MaxClients: maximum number of simultaneous client connections
    # MinSpareThreads: minimum number of worker threads which are kept spare
    # MaxSpareThreads: maximum number of worker threads which are kept spare
    # ThreadsPerChild: constant number of worker threads in each server process
    # MaxRequestsPerChild: maximum number of requests a server process serves
    <IfModule mpm_worker_module>
        StartServers          2
        MaxClients          150
        MinSpareThreads      25
        MaxSpareThreads      75 
        ThreadsPerChild      25
        MaxRequestsPerChild   0
    </IfModule>
    
    # These need to be set in /etc/apache2/envvars
    User ${APACHE_RUN_USER}
    Group ${APACHE_RUN_GROUP}
    
    #
    # AccessFileName: The name of the file to look for in each directory
    # for additional configuration directives.  See also the AllowOverride
    # directive.
    #
    
    AccessFileName .htaccess
    
    #
    # The following lines prevent .htaccess and .htpasswd files from being 
    # viewed by Web clients. 
    #
    #<Files ~ "^\.ht">
    #    Order allow,deny
    #    Deny from all
    #</Files>
    
    #
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value.  If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    #
    DefaultType text/plain
    
    
    #
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    #
    HostnameLookups Off
    
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog /var/log/apache2/error.log
    
    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn
    
    # Include module configuration:
    Include /etc/apache2/mods-enabled/*.load
    Include /etc/apache2/mods-enabled/*.conf
    
    # Include all the user configurations:
    Include /etc/apache2/httpd.conf
    
    # Include ports listing
    Include /etc/apache2/ports.conf
    
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
    #
    LogFormat "%v:%p %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    
    #
    # Define an access log for VirtualHosts that don't define their own logfile
    CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined
    
    #
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    #
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    #
    
    #
    # Putting this all together, we can internationalize error responses.
    #
    # We use Alias to redirect any /error/HTTP_<error>.html.var response to
    # our collection of by-error message multi-language collections.  We use 
    # includes to substitute the appropriate text.
    #
    # You can modify the messages' appearance without changing any of the
    # default HTTP_<error>.html.var files by adding the line:
    #
    #   Alias /error/include/ "/your/include/path/"
    #
    # which allows you to create your own set of files by starting with the
    # /usr/share/apache2/error/include/ files and copying them to /your/include/path/, 
    # even on a per-VirtualHost basis.  The default include files will display
    # your Apache version number and your ServerAdmin email address regardless
    # of the setting of ServerSignature.
    #
    # The internationalized error documents require mod_alias, mod_include
    # and mod_negotiation.  To activate them, uncomment the following 30 lines.
    
    #    Alias /error/ "/usr/share/apache2/error/"
    #
    #    <Directory "/usr/share/apache2/error">
    #        AllowOverride None
    #        Options IncludesNoExec
    #        AddOutputFilter Includes html
    #        AddHandler type-map var
    #        Order allow,deny
    #        Allow from all
    #        LanguagePriority en cs de es fr it nl sv pt-br ro
    #        ForceLanguagePriority Prefer Fallback
    #    </Directory>
    #
    #    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
    #    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
    #    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
    #    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
    #    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
    #    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
    #    ErrorDocument 410 /error/HTTP_GONE.html.var
    #    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
    #    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
    #    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
    #    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
    #    ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
    #    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
    #    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
    #    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
    #    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
    #    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
    
    
    
    # Include of directories ignores editors' and dpkg's backup files,
    # see README.Debian for details.
    
    # Include generic snippets of statements
    Include /etc/apache2/conf.d/
    
    # Include the virtual host configurations:
    Include /etc/apache2/sites-enabled/
    J'y ai juste autorisé l'affichage du .htaccess. Touts les autres fichiers de conf sont dans leur état d'origine. Qu'est ce qui peut faire que "Options -Indexes" ne soit pas pris en compte ? Peut-être que ça ne marche qu'avec des virtualhost ? Sur mon autre serveur je n'ai eu aucun problèmes avec ça...
    Les fichiers de conf sont bien lus, si je mets une connerie dedans apache ne redémarre pas. Même si vous n'avez pas de solution, dites-moi si vous ne trouvez pas ça normal non plus !

    Edit : retrait de l'url
     
  3. seebz
    seebz WRInaute impliqué
    Inscrit:
    15 Avril 2007
    Messages:
    728
    J'aime reçus:
    0
    Essaye en mettant la directive dans un bloc
    Code:
    <Directory "/chemin/">
    Options -Indexes
    </Directory>
     
  4. Toma
    Toma WRInaute discret
    Inscrit:
    18 Janvier 2006
    Messages:
    217
    J'aime reçus:
    0
    Merci pour ta réponse.
    J'ai essayé avec un bloc Directory et un peu tout les chemins possibles "/", "/var/www/", avec ou sans guillemets, ça ne change rien. :(
     
  5. seebz
    seebz WRInaute impliqué
    Inscrit:
    15 Avril 2007
    Messages:
    728
    J'aime reçus:
    0
    Mais tu en as déja des blocs directory dans tes fichier .conf, non ?
    Il me semble qu'il y en a un qui correspond au chemin du dossier www
     
  6. Toma
    Toma WRInaute discret
    Inscrit:
    18 Janvier 2006
    Messages:
    217
    J'aime reçus:
    0
    Seebz je t'aime.
    Il y avait se maudit /etc/apache2/sites-enabled/000-default qui était passé entre mes doigts et qui disait bien sur :

    Code:
    <Directory /var/www/>
                    Options Indexes FollowSymLinks MultiViews
                    AllowOverride None
                    Order allow,deny
                    allow from all
    </Directory>
    Merci mille fois !
     
  7. seebz
    seebz WRInaute impliqué
    Inscrit:
    15 Avril 2007
    Messages:
    728
    J'aime reçus:
    0
    Content que le problème soit résolu ;)
    Si tu peux pouvoir surcharger cette directive (ou une autre) dans un sous dossier, il faudra que tu modifies la ligne AllowOverride... Je te laisse te documenter si nécessaire.
     
Chargement...
Similar Threads - Options Indexes inefficace Forum Date
Les options d'URL pour le tracking ne fonctionne pas AdWords 13 Août 2018
Interdiction de la pub Forex, CFD, options binaires Monétisation d'un site web 28 Novembre 2016
Options de calcul du PageRank interne des pages d'un site Netlinking, backlinks, liens et redirections 23 Novembre 2015
Création d'un site web, quelles options pour déclarer? Droit du web (juridique, fiscalité...) 12 Mars 2015
Options de correspondance des mots clés AdWords 7 Juin 2013
[JS] Actualiser options <select> après choix d'un autre <select> Développement d'un site Web ou d'une appli mobile 28 Juin 2012
Constats depuis les nouvelles options de correspondance AdWords 4 Juin 2012
Différence entre les differentes options Google.ca Google : l'entreprise, les sites web, les services 13 Mars 2012
Les options de référencement Débuter en référencement 21 Mai 2011
Renseignements sur les options de paiement en ligne Développement d'un site Web ou d'une appli mobile 14 Février 2010
  1. Ce site utilise des cookies. En continuant à utiliser ce site, vous acceptez l'utilisation des cookies.
    Rejeter la notice